--- title: "Troubleshooting Your Helcim Card Reader (3rd Generation)" slug: "troubleshoot-card-reader-gen-3" description: "Fix common issues with the 3rd generation Helcim Card Reader, including connection drops, \"purple mountain\" screens, and card read errors." updated: 2026-01-23T23:35:41Z published: 2026-01-23T23:35:41Z canonical: "learn.helcim.com/troubleshoot-card-reader-gen-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://learn.helcim.com/llms.txt > Use this file to discover all available pages before exploring further. # Troubleshoot the Helcim Card Reader (3rd Generation) # Even the best technology has the occasional "hiccup." This guide covers the most common troubleshooting steps for the 3rd generation reader so you can get back to serving your customers without skipping a beat. ### ## My reader shows "purple mountains" on boot up --- When you turn on your reader, you should see the Helcim logo followed by a **Get Started** button. If you instead see a screen with a background of purple mountains, it just means the reader hasn't launched the Helcim app as the default. ### The fix: 1. Use your finger to swipe up from the very bottom of the reader's screen to the top. This will reveal the app menu. 2. Look for the app icon labeled **HelcimCompanion** and tap it. 3. Tap **Get Started**. This will boot the correct software and set it as the default for the next time you power on. | ![](https://cdn.document360.io/4e721329-1a9d-4ef0-8d2f-497e0c1f185a/Images/Documentation/settings.png) | **Note:** If you swipe up and do not see the **HelcimCompanion** app anywhere in the menu, please contact our support team, as your device may need a software update. | | --- | --- | ## I can't find my device code --- If you are trying to pair your reader and the code isn't appearing, or the **Helcim POS app** isn't accepting it, check these two things: - **Verify your account:** It sounds simple, but double-check that you are logged into the **exact same** merchant account on both your computer and your card reader. If you have multiple business locations, they must match perfectly. - **Check your connection:** Open a web browser on your computer to make sure your internet is working. If the computer is offline, the "digital handshake" with the reader can't happen. ## My transaction is stuck or failed --- If you click **Charge** on your computer but nothing happens on the reader, the most likely culprit is "Sleep Mode." ### The fix: - **Wake it up:** To save battery, the reader will go to sleep after a period of inactivity. It must be in a "Wake" state to receive a payment. If the screen is black, tap the power button once or touch the screen to wake it up before you send the payment from your computer. - **Refresh the app:** If the reader is awake but still not receiving the sale, try clicking **Cancel** on your computer and then click **Charge** again to re-send the signal. ## Error: "Card read was interrupted" --- This message most commonly happens when a customer is using a debit card and inserts it into the chip slot. It can occur if the card is moved slightly or removed before the reader has finished the "digital handshake" with the bank. ### The fix: 1. Ask the customer to remove their card. 2. Tap **Try again** on the reader screen. You may need to do this once or twice to reset the prompt. 3. If the error persists, ask the customer to **Tap** their card instead of inserting it (as long as the total is within their bank's tap limit). ## Pairing and connection issues --- Since the 3rd generation reader uses an API connection via the internet, most "connection lost" issues are actually related to the internet signal rather than the hardware itself. - **Check the Workstation status:** Look at the bottom bar of your **Helcim POS** **app**. If it says **Disconnected**, click **Manage hardware** to try and re-establish the link. - **Test your Wi-Fi:** Ensure your computer is online. If your shop’s Wi-Fi is down, the reader will not be able to receive "pushed" payments from your computer. - **Verify the device code:** If you are trying to pair for the first time and it isn't working, **Log out** of the **Helcim Workstation** app and **Log back in**. This often forces a fresh API sync. ## Restarting your reader --- If the screen is frozen or the reader is acting sluggish, a quick restart is usually the best medicine. 1. Locate the power button on the side of the device. 2. Press and hold the button for about 3 seconds. 3. Select **Reboot** on the touchscreen. 4. Wait for the Helcim logo to appear and the reader to show the **Ready** screen. ## Next steps --- If you’ve tried these steps and your reader still isn't behaving, we're here to help. [Reach out to our support team](/v1/docs/how-to-contact-support) and we’ll dig deeper into what’s going on. ### --- ### FAQs **Why does the reader say "Waiting for Reader" on my computer?** This is a good sign! It means the payment was successfully "pushed" to the reader. Your computer is simply waiting for the customer to finish choosing a tip or entering their PIN on the reader’s touchscreen. **My reader is stuck on a "System Update" screen. What do I do?** Don't turn the reader off! When you first connect to Wi-Fi, the reader often needs to download the latest security features. This can take a few minutes depending on your internet speed. Keep it plugged into power and let it finish. **Does the reader work with a VPN?** Sometimes a VPN on your computer can block the API connection to the reader. If you’re having persistent pairing issues, try disabling your VPN to see if that clears the path for the "digital handshake."